Transmission Line Tool Integral Manual hydraulic Tool with 10 Ton Output

Transmission Line Tool Integral Manual hydraulic Tool with 10 Ton Output

Performance Parameter

Copper and aluminum terminals and nozzles of power cable conductor body.Feature Description

• The hexagonal mould is adopted, and the pressure connection is tightly conductive, not easy to fall off and heat conduction.
• Two-stage hydraulic system: faster and more efficient.
• Manual release button: release the reset button during the press connection.
• Unique modular oil valve design: easy maintenance, less trouble.
• The head block is made of high quality raw material, which has high pressure and tensile resistance.
• Internal safety valve: the machine parts are not easy to damage, long service life.
• High strength aluminum alloy handle: lightweight, flexible and stronger.
• Aluminum alloy with lock storage box, beautiful, strong and durable.

Instructions

• Check whether the pressed terminal matches the wire specification.

• Select the mold you want to press, such as the gauge of the pressed terminal 240², then select the upper and lower mold of 240².

• Put the mould into the piston and head seat respectively.

• Repeatedly start the operation handle and watch the mold. When the upper and lower molds meet a profit, the pressure is finished.

Note

• If the user does not pay attention to continue the start, the pump will have the sound of "click click click click", which will be opened for the safety protection device, the piston stops moving, the operating handle should be rotated clockwise so that the top part is pressed down against the top village, then the piston will return to its original position.

overhead line construction tools

manual chain block

Transmission Line Tool Integral Manual hydraulic Tool with 10 Ton Output Images